Hot Sale 48V/60V1000W 2 Wheel Electric Scooter

Product DeDescription: Packing & Deliver Summer electric scooter battery maintenance has a "trick" Summer is high temperature, rainy. It is very difficult to travel. Nowadays, more and more people use electric scooter as a means of transport. More and more people riding electric...
Product description

Model

ES-ST

Max. Motor power(W)

1000W Brushless motor

Battery

48v/60v 20ah lead-acid battery

Front brake

disc brake

Rear brake

disc brake 

Wheelbase

1260mm

Tyre

130/90-10 vacuum tyre

Charging times

lead-acid ≥ 350times

Dimensions

1800*700*1040mm

Max speed

55km/h

Runing distance

60km

Rated loading

150kg

Capacity of battery

20A

Rated volte

48V/60v

Motor type

Brushless

Rated climb capacity

13degree

Rated input volte

220v

Charger

110v/220v 50-60Hz

Charging time

6-8h

N.W./G.W.

75kgs/110kgs

Packing size

1740*540*880mm

Container loading

26pcs/20GP, 84pcs/40HQ

Packing & Deliver

8.png















Summer electric scooter battery maintenance has a "trick"

Summer is high temperature, rainy. It is very difficult to travel. Nowadays, more and more people use electric scooter as a means of transport. More and more people riding electric scooters. Encounter such a summer, electric scooter battery protection becomes the key.

So, the power source of electric bicycles - how to maintain the battery, the experts made five suggestions:

      1.should not lose power storage, loss of power state that the battery is not used after the timely charging, prone to sulfation, lead sulfate crystals attached to the plate, blocking the ion channel, resulting in insufficient charge, battery capacity decreased. The longer the idle time is, the more serious the battery is damaged. When the battery is idle, it should be charged once a month, which can prolong the battery life.

2.To the regular inspection, in the course of the use of electric bicycles continued mileage in a short period of time suddenly dropped more than ten kilometers, it is likely that the battery group at least one battery dislocation, plate softening, plate active substances Off and other short-circuit phenomenon. At this point, should be promptly to the professional battery repair institutions to check, repair or with groups.

3.Not large current discharge, electric bike at the start, manned, uphill, the best with pedal power, try to avoid instantaneous high current discharge. Large current discharge easily lead to crystallization of lead sulfate, thereby impairing the physical properties of the battery plate.

4.Master the charging time, under normal circumstances the battery are charged at night, the average charging time in about 8 hours. If the light discharge (charging mileage is very short), the battery will soon be filled, continue to charge will appear overcharge phenomenon, resulting in battery dehydration, fever, reduce battery life. Therefore, the battery discharge depth of 60% -70% when the best charge, the actual use can be converted into riding mileage, according to the actual situation necessary to charge, to avoid nuisance charge.

5.To prevent high temperature exposure, electric vehicles are strictly prohibited in the sun exposure. The temperature is too high the environment will increase the internal pressure of the battery leaving the battery limit valve forced to open automatically, the direct consequence is to increase the battery water loss, and excessive battery dehydration will inevitably lead to decreased battery activity to accelerate the plate softening, charging shell Body heat, shell from the drum, deformation and other fatal injuries.

Related Products
Feedback

Copyright © Wuxi Yaledi International Trade Co.,Ltd All Rights Reserved.Tel: +86-510-88780706